With the upland season far enough past that my office legs have caught up with me, my time for reflection on the recent upland bird season has brought to bear a review of two dog vests by Hurtta.
For those not familiar with Hurtta, this Finnish company opened its doors in 2002 and is quite popular among European countries for their canine accessories. Founded by clothing professionals with a need to outfit their own dogs with functional performance gear in snow country, they reached out to dog owners around the globe for inspiration, designing a variety of coats, vests, harnesses, collars, and more to provide comfort and protection.
More than twenty years hence, Hurrta’s success encouraged the opening of a North American branch, Hurtta America (@Hurtta.America), to serve the US and Canada. To promote sales and awareness, Hurtta America reached out to folks through Instagram, offering free products in exchange for testing and marketing opportunity. As luck would have it, my wife Ali (@SixTailsSetters) was chosen to be a product tester.
We selected the Ranger (below left) and Worker (below right)vests in orange, testing their performance against a season of bird hunting from the September grouse coverts, to the icy December pheasant haunts of the Washington Palouse. Here is how they shook out.
Right off the bat you will notice the style and beauty of these vests. They are just flat sharp on my Llewellin setters.
Both vests are made with a light-weight, stretchy, breathable, very quiet material with snug fit. Hurtta boasts their “Houndtex” weatherproofing layer that is treated with Clariant Sanitized® containing permethrin as the active substance protecting against insects such as mosquitos, horseflies, and ticks. (NOTE: permethrin is toxic to cats.) Both vests have high-visibility 3M® reflective material and zip down the back, and a button-like apparatus on the top left shoulder to attached an LED for night activities.
The Worker is a longer vest with a Cordura® belly fabric that extends from the neck back. There are lines along the back of the belly flap indicating a trim-to-fit (I did not trim for our setters). The Worker neck line extends a bit higher than the Ranger. The Worker also has removable straps along the neck meant to secure a GPS collar.
The Ranger is more adjustable in size, meaning it has Velcro-like front shoulder straps that can be adjusted, where the Worker is a solid piece vest.
Fit and Comfort
“Tight-fitting” is Hurtta’s description of these vests, and they are not kidding. Based on Hurtta’s sizing chart, we ordered medium vests. The Ranger would not fit our larger 35-pound Llewellin, Finn, but Fit our smallest 28-pound Llewellin, Yuba, perfectly. It stretched exactly to the back of her rib cage and fit snug around her chest.
The snug fit was great for reducing the amount of grass and twig debris and weed seeds from getting into the vest. Both vests appeared to be comfortable, the soft fabric being gentle on their armpits.
Heat and Cold
The thin material these vests are made of provides absolutely no warmth, nor did I expect it to. The upside is that these vests are exceptional for September – October when the temperature is still warm. At no time did the vest cause my girls get too warm hunting early-season grouse.
The downside is that these vests are not great for high-energy setters or pointing dogs with little body fat and thin coats once winter decides to dabble in your hunt. Yuba was wearing her Ranger when she went into hypoglycemic seizure on a wet, icy day afield. The cold temps contributed to the seizure. There were a number of other factors involved (see my earlier blog post An Ounce of Prevention) and an insulated vest alone would not have prevented the seizure, but certainly would have been a better choice over the Ranger.
Noise and Utility
One of my favorite features is how quiet the vest material is. With birds like pheasant that spook at the slightest disturbance, these vests are nearly silent through timber and grasslands. I firmly believe that this played a role in the number of successful points my girls had on pheasant over the 2018 season.
The reflective strips and orange color provide excellent visibility at all times. Seeing a small dog in the bunchgrass or riparian thickets can be more than tricky, particularly if you hunt without electronics. A small dog on point can be hard to spot, but much easier with a good, bright vest.
The zipper down the back of the vest is an excellent feature as well. Vests that clip on have straps that can loosen or get caught on brush, but the low profile and lack of bulky hardware made these vests great for thick cover. The stretch of the fabric is also forgiving where brush can grab bulky material.
One minor, yet thoughtful feature is a button on the back near the start of the zipper. To put the vest on your pup, snap the button together and it holds the fabric in place as you zip it up. This is superb for squirmy pups.
Durability is lacking in comparison to some of the more rugged vests that use rip-stop type fabrics (e.g. Sylmar Bodyguard). Weed seeds like yellow starthistle spikes did not penetrate any more than other vests we have used, but the stitching is far too weak for a hunting dog vest.
Fabric around the neck and armpits is surged with a fine thread comparable to what may be used on a tee-shirt. The Ranger neck stitching was in tatters after about two hours in grouse cover. With that said, the fabric itself never frayed, stitching be damned. I hunted Yuba in that vest for two months afterward with no issues.
Tattered neck stitching on the Ranger ⇑⇑.
Another plus is that the fabric held up to barbed wire much better than I expected. My setters believe there is always a bird on the other side of a fence, so we had many encounters this past season, but only twice did Finn hit a fence hard enough to tear the fabric on the Worker; the Ranger suffered not one tear.
Barbed-wire tears on the Worker ⇑⇑.
Speaking of barbed wire, the LED attachment button could stand for heavier stitching as well, but again, it withstood a lot more abuse than I anticipated.
LED attachment “button” nearly ripped off ⇑⇑.
Weed seeds stuck readily to the fabric, but for the most part were easily brushed off. A small, black weed seed known as the stickseed did a number on the soft armpit and neck fabric edges and stitching. There are permanent stickseeds in this area of both vests. Otherwise, the fabric stood up to the roughness of the seeds quite well.
Houndstongue and small, black stickseeds embedded in the armpit fabric on the Ranger ⇑⇑.
On the Ranger, grass debris and weed seeds get into the Velcro-like patches on the shoulders over time, causing the corners to peel up. They never came completely unhooked in the field, but cleaning these patches out can be troublesome.
Houndstongue, stickseeds, and grass debris stuck in the Velcro-like shoulder straps on the Ranger ⇑⇑.
Overall, I was impressed with the vests. They were comfortable, cool in hot weather, relatively durable, visible, stylish, and low-profile in heavy cover. Weed seeds were a minor issue and the fabric held up to rough stuff like barbed wire as well as could be expected.
My one recommendation for Hurtta would be to use heavier thread to surge the fabric edges.
If I had to give these vests a numerical rating, I would go 4 out of 5 stars with the Worker being the better vest. My girls will be wearing their vests again next fall when the September grouse season opens, and I anticipate this will be the case for several years to come.
You can find Hurtta products at https://www.hurtta247.com/. The Ranger and Worker vests are priced at $45 and $55, respectively. If style and comfort are important to you, you will be hard pressed to find another vest comparable to the Hurtta line. If durability is number one, you can find tougher vests, such as they Sylmar Bodyguard (about the same price), which we also use in the field and recommend.
Yuba and her Ranger vest looking sharp and sporting a fair covering of houndstongue ⇑⇑.